Page 1 of 1

Nexus 9k 9.2.1

Posted: Tue Jul 24, 2018 7:29 am
by coutts99
Hello,

I'm trying to get the new Nexus 9k image working in Eve, it doesn't appear to do anything when I try and start it, could someone possibly let me know how to start debugging why?

Thanks

Re: Nexus 9k 9.2.1

Posted: Tue Jul 24, 2018 7:44 am
by coutts99
Ignore me, deleted, re-uploaded, works fine

Re: Nexus 9k 9.2.1

Posted: Tue Jul 24, 2018 8:03 am
by Uldis (UD)
nothing new for it same how to, get qcow2 image and use it..

Tested all works nice.
http://www.eve-ng.net/documentation/how ... x9k-switch

Very nice image, finally supporting LACP without any patching. LACP with regular SW etc

Code: Select all

switch# sh ver
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_serie
s_home.html
Copyright (c) 2002-2018, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software are covered under the GNU Public
License. A copy of the license is available at
http://www.gnu.org/licenses/gpl.html.

Nexus 9000v is a demo version of the Nexus Operating System

Software
  BIOS: version 
  NXOS: version 9.2(1)
  BIOS compile time:  
  NXOS image file is: bootflash:///nxos.9.2.1.bin
  NXOS compile time:  7/17/2018 16:00:00 [07/18/2018 00:21:19]


Hardware
  cisco Nexus9000 9000v Chassis 
   with 8128928 kB of memory.
  Processor Board ID 9R5QQMMO1CC

  Device name: switch
  bootflash:    3509454 kB
Kernel uptime is 0 day(s), 0 hour(s), 5 minute(s), 58 second(s)

Last reset 
  Reason: Unknown
  System version: 
  Service: 

plugin
  Core Plugin, Ethernet Plugin

Active Package(s):
        
switch#