Page 1 of 1
VIOS images are not loading
Posted: Sat Aug 25, 2018 12:43 pm
by abhisheksha
Hi,
I installed EVE-NG newly. I'm using the following VIOS images for L2 and L3.
L3 - vios-adventerprisek9-1562-m
L3 - vios-adventerprisek9-m.vmdk.SPA.155-2
L2 - vios_l2-adventerprisek9-m.15.2.411
L2 - vios_l2-adverrpise-1520455
Each of L3 images loads with a CPU hog error and each of the L2 images don't boot up successfully after this:
Code: Select all
If you require further assistance please contact us by sending email to
export@cisco.com.
Cisco IOSv () processor (revision 1.0) with 722297K/62464K bytes of memory.
Processor board ID XXXXXYYYYYZZZZZ
4 Gigabit Ethernet interfaces
DRAM configuration is 72 bits wide with parity disabled.
256K bytes of non-volatile configuration memory.
2097152K bytes of ATA System CompactFlash 0 (Read/Write)
0K bytes of ATA CompactFlash 1 (Read/Write)
0K bytes of ATA CompactFlash 2 (Read/Write)
0K bytes of ATA CompactFlash 3 (Read/Write)
Can you please advise what can I do?
Re: VIOS images are not loading
Posted: Sat Aug 25, 2018 12:47 pm
by abhisheksha
Code: Select all
root@eve-ng:~# ./evenginfo.sh
***** EVE-NG INFORMATION TOOL - CREATED BY R! ******
Sat Aug 25 18:16:46 IST 2018
***** EVE-NG VERSION INSTALLED *****
eve-ng 2.0.3-92
***** HOSTNAME INFORMATION *****
Static hostname: eve-ng
Virtualization: vmware
Operating System: Ubuntu 16.04.3 LTS
Kernel: Linux 4.9.40-eve-ng-ukms-2+
Architecture: x86-64
***** FILE SYSTEM DISK SPACE USAGE *****
Filesystem Size Used Avail Use% Mounted on
udev 59G 0 59G 0% /dev
tmpfs 12G 16M 12G 1% /run
/dev/mapper/eve--ng--vg-root 276G 2.8G 259G 2% /
tmpfs 60G 0 60G 0% /dev/shm
tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs 60G 0 60G 0% /sys/fs/cgroup
/dev/sda1 472M 83M 366M 19% /boot
***** CPU INFORMATION *****
model name : Intel(R) Xeon(R) CPU E5-2680 0 @ 2.70GHz
***** FREE AND USED MEMORY *****
total used free shared buff/cache available
Mem: 118G 1.0G 116G 25M 902M 115G
Swap: 119G 0B 119G
***** INTERFACE INFORMATION *****
pnet0 8000.000c294d4f2a no eth0
pnet1 8000.000000000000 no
pnet2 8000.000000000000 no
pnet3 8000.000000000000 no
pnet4 8000.000000000000 no
pnet5 8000.000000000000 no
pnet6 8000.000000000000 no
pnet7 8000.000000000000 no
pnet8 8000.000000000000 no
pnet9 8000.000000000000 no
***** KVM CHECK INFORMATION *****
INFO: /dev/kvm exists
KVM acceleration can be used
***** APACHE STATUS *****
* apache2.service - LSB: Apache2 web server
Active: active (running) since Sat 2018-08-25 14:47:37 IST; 3h 29min ago
***** CHECKING INERNET STATUS *****
PING www.google.com (172.217.14.228) 56(84) bytes of data.
64 bytes from sea30s02-in-f4.1e100.net (172.217.14.228): icmp_seq=1 ttl=47 time=61.1 ms
--- www.google.com ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 61.108/61.108/61.108/0.000 ms
***** COPY or SCREENSHOT THIS INFORMATION FOR EVE SUPPORT TO HELP/UNDERSTAND YOUR SYSTEM INFORMATION.******
***** http://www.eve-ng.net/forum/ ******
Re: VIOS images are not loading
Posted: Sun Aug 26, 2018 7:11 am
by Uldis (UD)
loading loading...
Just check if your antivirus is not inspecting virtual machines...
Re: VIOS images are not loading
Posted: Sun Aug 26, 2018 2:02 pm
by abhisheksha
Nah, solved it. There was no scope of AV running since the EVE instance is running on an ESXi. Figured I was doing nested-nested virtualization and instead just brought the EVE VM to the top level virtualization level and the images loaded up very fast. Thank you for responding though!
Re: VIOS images are not loading
Posted: Mon Aug 27, 2018 2:39 pm
by cstaffbrad
does stp works on your labs?
Re: VIOS images are not loading
Posted: Mon Aug 27, 2018 3:35 pm
by Uldis (UD)
cstaffbrad wrote: ↑Mon Aug 27, 2018 2:39 pm
does stp works on your labs?
Answered in other your post