Support and News Forum

Hello Sir,

I am a network engineer from China and very interested in EVE-NG after given a brief introduction from Cisco.

These days, I tried to download several type of Voas including IOU/IOL vWAAS, ASAv , NX9K. but only IOU/IOL is successful. others are failed.

Could you please analysis the problem below and give me some advice ?

Much appreciate your help

1 Problem description:
(1)I download the same version of voa files for ASA, Nexus9k, WAAS as the HowTo's
(2) do the same steps follow up with HowTo's
(3) Run EVE-NG web portal and add node (ASA, Nexus9K, WAAS).
(4) Telnet to IP with 327xx port number via SecureCRT
(5) but in the SecureCRT , no any response after raise the connecting to Nodes ( connection is green, but no any command response,it is blank)


2 Physical computer
Intel i5-4300U CPU, 1.9Ghz 2.5Ghz
Memory: 8G

3 VMware workstation version 8.0.3 build-703057
Vmware EVE server's virtual memory is 11520 reduced by system from 16 to 11.52G

well,


and is your CPU set for Intel VT-X/EPT option ?
and starting from VM workst 9 -12 is supported

and is your CPU set for Intel VT-X/EPT option ?
Yes, i check my bios seting for HP 820 , I have enable the all virtualation setting in Bios.

and starting from VM workst 9 -12 is supported
I have another PC with VMware 11 , but it still has this problem.


Do you think if my laptop hasn't enough memory ?

thanks

I think that settings are still not right

come in our skype help maybe online we can look what you have not done there

https://join.skype.com/hp6FIrOYpcuJ

Hi Sir,

My time zone is GMT+8 Singapore time zone.

Can I make an appointment with you when the time is suitable for you.

I will setup my Lab before the change

Can you share your mail address so that i sent the MML to you

Much appriecate your help.

Please see the screen from the issue node

sir for correct image upload and preparation you have to follow our HowTo page !!!

http://www.eve-ng.net/index.php/documentation/howto-s

advice, get fresh nice asav 9.7.1 qcow image from cisco and follow our how to prep asav for eve

UD

Thank you all of your help.

Thank you very much eve engineer

thank you all friends to reply or looking this problem.

1 vmware 12
2 asav971-4.qcow2
3 follow up with Howto's . we must trust it and follow up it striclty
4 i have one issue when apt-get install libguestfs-tools
reason some of US sources are block so the installaion was failed
solution: change sources.list , choose others source list to try installation.

My ASAv works fine using the VNC viewer. How will I configure the ASAv to use Putty or SecureCRT? Thanks.