Slow Performance

Before posting something, READ the changelog, WATCH the videos, howto and provide following:
Your install is: Bare metal, ESXi, what CPU model, RAM, HD, what EVE version you have, output of the uname -a and any other info that might help us faster.

Moderator: mike

gcastbr
Posts: 34
Joined: Wed Mar 22, 2017 5:43 pm

Slow Performance

Post by gcastbr » Wed Mar 22, 2017 5:49 pm

Hi,

I installed the eve (old unetlab too) I could notice that i have a poor performance to boot my devices. I have a i7, ssd 32gb, with virtualization enabled on BIOS, but is take too long to boog the juniper vMX, vSRX as well. I've wait for around 1 hour to boot one device.

I've already try to enable some vmware tips but didn't work. May you have something to help me?

Regards

ecze
Posts: 533
Joined: Wed Mar 15, 2017 1:54 pm

Re: Slow Performance

Post by ecze » Wed Mar 22, 2017 10:19 pm

We never observe such situation with i7.
Juniper devices are very long to boot, indeed but should be booted after 10 minutes ( first time boot requiring some disk initialization )

E.

gcastbr
Posts: 34
Joined: Wed Mar 22, 2017 5:43 pm

Re: Slow Performance

Post by gcastbr » Wed Mar 22, 2017 11:03 pm

Yes, I'm running vmware workstation 12, I have an asus rog laptop i7 6700HQ with SSD. I really don't know what can i do to resolve that.

Juniper virtual router take a long to boot (5min, 10min is perfect) but 1 hour is a lot. I seems like some I/O problem. When I set up vMX directly on vmware, it worked fine.

Uldis (UD)
Posts: 5067
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: Slow Performance

Post by Uldis (UD) » Thu Mar 23, 2017 12:07 am

I guess better join in our skype group and lets talk there:
https://join.skype.com/hp6FIrOYpcuJ

Muhabat
Posts: 5
Joined: Sun Mar 19, 2017 10:27 am

Re: Slow Performance

Post by Muhabat » Thu Mar 23, 2017 5:54 am

make sure you are using 64 bit windows not 32 bit.

gcastbr
Posts: 34
Joined: Wed Mar 22, 2017 5:43 pm

Re: Slow Performance

Post by gcastbr » Thu Mar 23, 2017 12:45 pm

Hi,

Yes, I'm running a windows 64bits - windows 10 64bits - vmware workstation 12.

I've already checked, the vt in bios is enabled, is everything correct in my setup. I don't know what is going on here.

It's seems like my read and write disk is slow, but i have a ssd. may is some interface between workstation because nested virtualization.

Uldis (UD)
Posts: 5067
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: Slow Performance

Post by Uldis (UD) » Thu Mar 23, 2017 7:23 pm

Can you finally join in skype to check your problem ?

gcastbr
Posts: 34
Joined: Wed Mar 22, 2017 5:43 pm

Re: Slow Performance

Post by gcastbr » Thu Mar 23, 2017 7:44 pm

Yes. sorry. I didn't see your skype sorry.

vkukshal03
Posts: 25
Joined: Fri Mar 24, 2017 9:38 am

Re: Slow Performance

Post by vkukshal03 » Fri Mar 24, 2017 9:43 am

Hi UD, Hope you are doing good
I am also facing the same slowness issues Vios and all Qemu machines , They all works fine in UNL with same laptop.. I have LENOVO E550 with i5 processor and 16 GB DDR3 RAM. Question is why they all worked in UNL ,not in EVE. Please check and let me know, Thanks. I am posting this as I have exhausted all the possible steps.. and only hope is you.. Thanks.

Uldis (UD)
Posts: 5067
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: Slow Performance

Post by Uldis (UD) » Fri Mar 24, 2017 11:49 am

go to skupe group, maybe I can look..

Post Reply