Support and News Forum

Hi,

I installed the eve (old unetlab too) I could notice that i have a poor performance to boot my devices. I have a i7, ssd 32gb, with virtualization enabled on BIOS, but is take too long to boog the juniper vMX, vSRX as well. I've wait for around 1 hour to boot one device.

I've already try to enable some vmware tips but didn't work. May you have something to help me?

Regards

We never observe such situation with i7.
Juniper devices are very long to boot, indeed but should be booted after 10 minutes ( first time boot requiring some disk initialization )

E.

Yes, I'm running vmware workstation 12, I have an asus rog laptop i7 6700HQ with SSD. I really don't know what can i do to resolve that.

Juniper virtual router take a long to boot (5min, 10min is perfect) but 1 hour is a lot. I seems like some I/O problem. When I set up vMX directly on vmware, it worked fine.

I guess better join in our skype group and lets talk there:
https://join.skype.com/hp6FIrOYpcuJ

make sure you are using 64 bit windows not 32 bit.

Hi,

Yes, I'm running a windows 64bits - windows 10 64bits - vmware workstation 12.

I've already checked, the vt in bios is enabled, is everything correct in my setup. I don't know what is going on here.

It's seems like my read and write disk is slow, but i have a ssd. may is some interface between workstation because nested virtualization.

Can you finally join in skype to check your problem ?

Yes. sorry. I didn't see your skype sorry.

Hi UD, Hope you are doing good
I am also facing the same slowness issues Vios and all Qemu machines , They all works fine in UNL with same laptop.. I have LENOVO E550 with i5 processor and 16 GB DDR3 RAM. Question is why they all worked in UNL ,not in EVE. Please check and let me know, Thanks. I am posting this as I have exhausted all the possible steps.. and only hope is you.. Thanks.

go to skupe group, maybe I can look..