Palo alto 8.0
Moderator: mike
-
aakhalaf
- Posts: 4
- Joined: Mon Jun 19, 2017 6:25 am
Palo alto 8.0
Hey guys, I have no issue with any of my images including PAN 7.0.1 - just got my hand on PAN OS 8.0.0 - spent 3 hours to get it to work, but no luck. I can CLI no problem - set the mgmt IP and commit but can't ping or access the web ui. ;-( tried it in ESXI and VMWARE to make sure I got a good image and found no issues. Would love to get it to work on eve -plZZZZZZZZZZZZZZZZZZZZZZZ help!!
-
ping2naveen
- Posts: 10
- Joined: Tue Mar 21, 2017 1:03 pm
Re: Palo alto 8.0
Hi,
Please use the below command also and commit your changes. it will start working.
#set deviceconfig system ip-address 10.10.10.123 netmask 255.255.255.0
#set deviceconfig system type static (new command introduced in PAN 8.0)
try to configure the IP address as mentioned above and check your access. It should work and I am using PAN 8.0
Naveen Malik
Please use the below command also and commit your changes. it will start working.
#set deviceconfig system ip-address 10.10.10.123 netmask 255.255.255.0
#set deviceconfig system type static (new command introduced in PAN 8.0)
try to configure the IP address as mentioned above and check your access. It should work and I am using PAN 8.0
Naveen Malik
