Support and News Forum


https://www.eve-ng.net/forum/

vmx Junos: 14.1R4.8 interface are up even there are no connections?

https://www.eve-ng.net/forum/viewtopic.php?f=5&t=1033

Page 1 of 1

vmx Junos: 14.1R4.8 interface are up even there are no connections?

Posted: Wed Sep 13, 2017 2:10 am
by ggcc
Hello Team,

Question: Do you know why Interfaces of Juniper Model: vmx Junos: 14.1R4.8 interface are up even there are no connections?

This cause the issue when two vMX are interconnecting, disable interface on one vMX the other vMX interface is still up.

Example:
vMX1: em2 <---> vMX2:em2


Issue:
When disable interface em2 on vMX1 the interface vMX2:em2 is still up, so traffic is still being sent to vMX2:em2 interface.

Thanks,

Code: Select all

eve@vMX1> show interfaces terse 
Interface               Admin Link Proto    Local                 Remote
cbp0                    up    up
demux0                  up    up
dsc                     up    up
em0                     up    up
em1                     up    up
em1.0                   up    up   inet     172.16.0.1/16   
                                   inet6    fe80::5200:ff:fe01:1/64
em2                     up    up
em2.0                   up    up   inet     12.12.12.1/24   
em3                     up    up
em3.0                   up    up   inet     13.13.13.1/24   
em4                     up    up
em5                     up    up
gre                     up    up
ipip                    up    up
irb                     up    up
lo0                     up    up
lo0.0                   up    up   inet     1.1.1.1             --> 0/0
lo0.16384               up    up   inet     127.0.0.1           --> 0/0
lo0.16385               up    up   inet     128.0.0.1           --> 0/0
                                            128.0.0.4           --> 0/0
                                   inet6    fe80::200:f:fc00:0
lo0.32768               up    up        
lsi                     up    up
mtun                    up    up
pimd                    up    up
pime                    up    up
pip0                    up    up
pp0                     up    up
tap                     up    up
vtep                    up    up

eve@vMX1> show version 
Hostname: vMX1
Model: vmx
Junos: 14.1R4.8
JUNOS Base OS Software Suite [14.1R4.8]
JUNOS Base OS boot [14.1R4.8]

Re: vmx Junos: 14.1R4.8 interface are up even there are no connections?

Posted: Wed Sep 13, 2017 8:05 am
by Chris929
All interfaces are always up except you shut them administratively - but physical will always be up - it's how eve is designed - this is expected behavior

Re: vmx Junos: 14.1R4.8 interface are up even there are no connections?

Posted: Wed Sep 13, 2017 9:35 am
by mike
that is not related to design Chris.

Both vMX connected to the linux bridge, not only vMX, but any node in eve.
That is why when you shutdown one side it won't put the other side into "down".

As a suggestion you can use some keepalive protocols to simulate proper behavior.

Re: vmx Junos: 14.1R4.8 interface are up even there are no connections?

Posted: Wed Sep 13, 2017 1:49 pm
by ggcc
Hi Mike,

Good suggestion. Thank you for your suggestion about keep alive.

Re: vmx Junos: 14.1R4.8 interface are up even there are no connections?

Posted: Wed Sep 13, 2017 3:21 pm
by ggcc
mike wrote: ↑
Wed Sep 13, 2017 9:35 am
 that is not related to design Chris.

Both vMX connected to the linux bridge, not only vMX, but any node in eve.
That is why when you shutdown one side it won't put the other side into "down".

As a suggestion you can use some keepalive protocols to simulate proper behavior.
Hi Mike,

Please help.

I have searched how to set interface keepalive on Juniper. However, I could not find the keepalive under set interface for both vSRX and vMX.

Thanks.

Code: Select all


 version 12.1X47-D15.4

eve@vSRX3# set interfaces ge-0/0/0 ?         
Possible completions:
  accounting-profile   Accounting profile name
+ apply-groups         Groups from which to inherit configuration data
+ apply-groups-except  Don't inherit configuration data from these groups
  description          Text description of interface
  disable              Disable this interface
  encapsulation        Physical link-layer encapsulation
  flexible-vlan-tagging  Support for no tagging, or single and double 802.1q VLAN tagging
> gigether-options     Gigabit Ethernet interface-specific options
  gratuitous-arp-reply  Enable gratuitous ARP reply
> hold-time            Hold time for link up and link down
  link-mode            Link operational mode
  mac                  Hardware MAC address
  mtu                  Maximum transmit packet size (256..9192)
  native-vlan-id       Virtual LAN identifier for untagged frames (0..4094)
  no-gratuitous-arp-reply  Don't enable gratuitous ARP reply
  no-gratuitous-arp-request  Ignore gratuitous ARP request
  no-per-unit-scheduler  Don't enable subunit queuing on Frame Relay or VLAN IQ interface
  no-traps             Don't enable SNMP notifications on state changes
  passive-monitor-mode  Use interface to tap packets from another router
  per-unit-scheduler   Enable subunit queuing on Frame Relay or VLAN IQ interface
  promiscuous-mode     Enable promiscuous mode for L3 interface
  speed                Link speed
  stacked-vlan-tagging  Stacked 802.1q VLAN tagging support
> switch-options       Front end ports configuration
> traceoptions         Interface trace options
  traps                Enable SNMP notifications on state changes
> unit                 Logical interface
  vlan-tagging         802.1q VLAN tagging support
[edit]


version 14.1R4.8

eve@vMX2# set interfaces em3 ?  
Possible completions:
  accounting-profile   Accounting profile name
+ apply-groups         Groups from which to inherit configuration data
+ apply-groups-except  Don't inherit configuration data from these groups
> auto-configure       Auto configuration
  description          Text description of interface
  disable              Disable this interface
  encapsulation        Physical link-layer encapsulation
  gratuitous-arp-reply  Enable gratuitous ARP reply
> hold-time            Hold time for link up and link down
  interface-transmit-statistics  Interface statistics based on the transmitted packets
> layer2-policer       Layer2 policing for interface
  link-mode            Link operational mode
  mac                  Hardware MAC address
  mtu                  Maximum transmit packet size (256..9192)
> multi-chassis-protection  Inter-Chassis protection configuration
  no-gratuitous-arp-reply  Don't enable gratuitous ARP reply
  no-gratuitous-arp-request  Ignore gratuitous ARP request
  no-traps             Don't enable SNMP notifications on state changes
> traceoptions         Interface trace options
  traps                Enable SNMP notifications on state changes
> unit                 Logical interface
  vlan-tagging         802.1q VLAN tagging support
[edit]

Re: vmx Junos: 14.1R4.8 interface are up even there are no connections?

Posted: Wed Sep 13, 2017 5:01 pm
by mike
https://www.juniper.net/documentation/e ... tions.html

Try that one

Re: vmx Junos: 14.1R4.8 interface are up even there are no connections?

Posted: Wed Sep 13, 2017 8:33 pm
by Chris929
mike wrote: ↑
Wed Sep 13, 2017 9:35 am
 that is not related to design Chris.

Both vMX connected to the linux bridge, not only vMX, but any node in eve.
That is why when you shutdown one side it won't put the other side into "down".

As a suggestion you can use some keepalive protocols to simulate proper behavior.
That's what i mean with "designed" - this is the way that eve works - between every link in every node there are bridges - there are no point-to-point connections - hence it's always "up". YOur idea with keepalives is good - thank you for that - i never bothered about the "up" state as i use BFD for my IGP's and VPN-Monitoring for my IPSec-Tunnels (Juniper only)
All times are UTC
Page 1 of 1
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/