Support and News Forum

Hi Team,

Is there a way to fix the issue that all IOSv device's interfaces are in admin shut down state after each reboot?

Regards,

mathew

No.

It is a Vios bug

EVE-NG did a work-around for exported config ( adding automatically a 'no shutdown' ) . But this works only when booting from exported config...

E.

Hi Ecze,

Thanks.

Can you please config that the workaround is to set the option "Set nodes startup-cfg to exported" under "more actions" icon/menu?

In my setup, under "Start-up config" - see attached image below.

Thanks in advance for your reply again.

Mathew

but it is already configured under more options menu...

Hi,

It is already set like that and I see like below in "Startup-configs" but when IOSv is started, they are in shutdown in all ports.

What I am missing here?

..
interface GigabitEthernet0/0
no shutdown
ip address 40.1.1.1 255.255.255.252
ip ospf network point-to-point
..
..

Mathew

Wipe before boot

Hi,

Thanks. After wipe and start IOSv fixed the issue.
I will do the same next time.

Mathew

I will try to wipe it. Thank's a lot!

Hi,

I run Community edition v2.0.3-92 and I see this issue has come back again.

Can you please check and let me know any workaround?

Thanks

Mathew