HSRP on NXOS Titanium 7.3 not working

Moderator: mike

Locked
Katui_CSP
Posts: 2
Joined: Fri Aug 14, 2020 5:11 pm

HSRP on NXOS Titanium 7.3 not working

Post by Katui_CSP » Fri Aug 14, 2020 5:50 pm

Hi Guru,

Not sure if any issue with NXOS Titanium verison as HSRP not working at all

Confirmed configuration is correct as below example

NXO-S1:
interface Vlan99
description Network Management
no shutdown
ip address 10.10.3.252/24
hsrp 1
authentication text Pa$$w0rd
preempt
priority 150
ip 10.10.3.254


NXO-S2:
interface Vlan99
description Network Management
no shutdown
ip address 10.10.3.253/24
hsrp 1
authentication text Pa$$w0rd
preempt
priority 140
ip 10.10.3.254

but show hsrp they all got active as the attachment

Regards,
You do not have the required permissions to view the files attached to this post.

Uldis (UD)
Posts: 5067
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: HSRP on NXOS Titanium 7.3 not working

Post by Uldis (UD) » Fri Aug 14, 2020 7:29 pm

Yes it is Titanium issue

Katui_CSP
Posts: 2
Joined: Fri Aug 14, 2020 5:11 pm

Re: HSRP on NXOS Titanium 7.3 not working

Post by Katui_CSP » Sat Aug 15, 2020 2:35 am

Alright it's clear now then have to move to NXOS-9K better right ? thanks

aldro
Posts: 12
Joined: Wed Sep 14, 2022 1:17 pm

Re: HSRP on NXOS Titanium 7.3 not working

Post by aldro » Tue Mar 28, 2023 6:53 pm

Also in this tread @gaudixit sugested using "standby use-bia" IOS interface configuration command to avoid problem with drop packet that use Virtual MAC address with default security option with switching frames in virtualization (vmware,kvm,gns,etc).
It allows succecsfull ping VIP with BIA MAC address with default security options on vswitch or port group or virtualization in linux.

Delwyn
Posts: 4
Joined: Tue Feb 08, 2022 4:38 am

Re: HSRP on NXOS Titanium 7.3 not working

Post by Delwyn » Thu Apr 20, 2023 9:13 am

Check the HSRP state on each switch using the "show hsrp" command to see if there are any issues or errors.mapquest driving directions

lindausa0106
Posts: 2
Joined: Fri May 05, 2023 1:35 am

Re: HSRP on NXOS Titanium 7.3 not working

Post by lindausa0106 » Fri May 05, 2023 1:40 am

To fix the problem that HSRP on NXOS Titanium 7.3 is not working, you can check the HSRP configuration: Make sure that the HSRP profiles on the devices are the same and correct. If there are differences between profiles, modify them to ensure that the devices are running the same profile. Pokemon Showdown

Uldis (UD)
Posts: 5067
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: HSRP on NXOS Titanium 7.3 not working

Post by Uldis (UD) » Fri May 05, 2023 8:15 pm

This image Titanium is totally non recommended, and also removed from Cisco CML images set as uselss
no wonder nothing works on it

Locked