Can't log into HTML mode after upgrade to 2.0.3-70

Moderator: mike

0rb677
Posts: 3
Joined: Fri Aug 07, 2020 9:38 pm

Re: Can't log into HTML mode after upgrade to 2.0.3-70

Post by 0rb677 » Sat Sep 05, 2020 5:16 pm

Same problem.
EVE-community is unusable. Before or after update, doesn't matter. I have a big lag ~2-3 min while opening a webpage. Please fix it.

Uldis (UD)
Posts: 5148
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: Can't log into HTML mode after upgrade to 2.0.3-70

Post by Uldis (UD) » Thu Sep 10, 2020 12:13 pm

Gents,
before upgrade to EVE Community version 2.0.3-110, you must be sure you have plenty of space on HDD system of EVE.
especially on boot.
Check with

Code: Select all

df -h
Next, doing upgrade, you must follow what happens on your uprade screen, if somthing would fail.
Next, the third command, apt dist-upgrade is required.

If still it fails to login use:

Code: Select all

echo "drop database guacdb ;" | mysql --password=eve-ng mysql ; apt install --reinstall eve-ng-guacamole
This will reinsstall guacamole which probably failed.

Last instance for this is recover your Sql database:

If all else failed, last resort to rip mysql out:
Verify if internet is reachable:

Code: Select all

ping www.google.com
#######stop sql processess###########

Code: Select all

systemctl stop mysql
#########remove lock for libs##############

Code: Select all

rm -f /var/lib/dpkg/lock
##############hard erase of sql and related packages################

Code: Select all

export TERM=xterm

Code: Select all

apt-get --purge autoremove  $(dpkg -l | grep 'mysql' | awk '{print $2}')
When prompted, confirm with yes

Code: Select all

rm -rf /var/lib/mysql

rm -rf /etc/mysql

##########Install eve-ng again##############

EVE-Community:

Code: Select all

apt-get install eve-ng

And finally if all bad, do backup and install fresh EVE Community then, and get back content.

https://www.eve-ng.net/index.php/backup-eve-ng-content/

Uldis

Uldis (UD)
Posts: 5148
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: Can't log into HTML mode after upgrade to 2.0.3-70

Post by Uldis (UD) » Sun Dec 20, 2020 11:23 pm

mikestanley464 wrote:
Mon Nov 23, 2020 5:33 pm
The following packages were automatically installed and are no longer required:
linux-headers-4.4.0-62 linux-headers-4.4.0-62-generic linux-headers-4.4.0-75 linux-headers-4.4.0-75-generic linux-headers-4.4.0-78 linux-headers-4.4.0-78-generic linux-headers-4.4.0-79 Bluestacks Omegle
linux-headers-4.4.0-79
If I will see again extra ads link in your post, I will bank YOU
Clear?

Last warning

Pagie
Posts: 4
Joined: Fri Dec 11, 2020 7:32 am

Re: Can't log into HTML mode after upgrade to 2.0.3-70

Post by Pagie » Tue Dec 29, 2020 1:04 pm

daniel wrote:
Sat Jul 22, 2017 1:45 am
I just did an upgrade from v2.0.3-60 and everything went fine except HTML login stopped working. When I change the mode from Native to HTML mode and press login button, nothing happens. Native OGWhatsApp Apk mode works fine and I haven't seen any other issues so far after the upgrade. I tried in Firefox and Safari both with cache cleared. Please advise if there is a workaround or new release to address the issue.

Thanks,
Daniel
kinda depends on server and environment as well as what access level you have. There is a command line script that will change an account password if the account given the script is set to manual authentication ... which the original admin account should still be. Located in code/admin/cli/ 'spirit of sharing', Ken

matias
Posts: 1
Joined: Wed Mar 24, 2021 1:17 am

Re: Can't log into HTML mode after upgrade to 2.0.3-70

Post by matias » Wed Mar 24, 2021 8:12 pm

0rb677 wrote:
Sat Sep 05, 2020 5:16 pm
Same problem.
EVE-community is unusable. Before or after update, doesn't matter. I have a big lag ~2-3 min while opening a webpage. Please fix it.
Hi guys,
I also have this issue. Is very annoying the lag, in my case I've to wait ~10 minutes until GUI load, doesn't matter if I choose "native" or "html5".
I have tried different browsers and cleared the cache, but I have the same lag.


########### Version ###############
root@eve-ng:/opt/unetlab/schema# dpkg -l eve-ng
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Name Version Architecture Description
+++-===============================-====================-====================-===================================================================
ii eve-ng 2.0.3-112 amd64 A new generation software for networking labs.

########### Memory ###########
root@eve-ng:/opt/unetlab/schema# free -gh
total used free shared buff/cache available
Mem: 125G 3.9G 113G 25M 8.8G 120G
Swap: 8.0G 0B 8.0G

####### CPU ################
root@eve-ng:/opt/unetlab/schema# lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 20
On-line CPU(s) list: 0-19
Thread(s) per core: 1
Core(s) per socket: 2
Socket(s): 10
NUMA node(s): 2
Vendor ID: GenuineIntel
CPU family: 6
Model: 79
Model name: Intel(R) Xeon(R) CPU E5-2650 v4 @ 2.20GHz
Stepping: 1
CPU MHz: 2194.711
BogoMIPS: 4389.42
Virtualization: VT-x
Hypervisor vendor: VMware
Virtualization type: full
L1d cache: 32K
L1i cache: 32K
L2 cache: 256K
L3 cache: 30720K
NUMA node0 CPU(s): 0-9
NUMA node1 CPU(s): 10-19
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ss ht syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon nopl xtopology tsc_reliable nonstop_tsc cpuid pni pclmulqdq vmx ssse3 fma cx16 pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand hypervisor lahf_lm abm 3dnowprefetch cpuid_fault invpcid_single pti ssbd ibrs ibpb stibp tpr_shadow vnmi ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 invpcid rdseed adx smap xsaveopt arat flush_l1d arch_capabilities

########### Space ###############
root@eve-ng:/opt/unetlab/schema# df -h
Filesystem Size Used Avail Use% Mounted on
udev 63G 0 63G 0% /dev
tmpfs 13G 15M 13G 1% /run
/dev/mapper/eve--ng--vg-root 533G 45G 467G 9% /
tmpfs 63G 0 63G 0% /dev/shm
tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs 63G 0 63G 0% /sys/fs/cgroup
/dev/sda1 472M 118M 330M 27% /boot



########### Apache services ##################
root@eve-ng:/opt/unetlab/schema# systemctl status apache2
* apache2.service - LSB: Apache2 web server
Loaded: loaded (/etc/init.d/apache2; bad; vendor preset: enabled)
Drop-In: /lib/systemd/system/apache2.service.d
`-apache2-systemd.conf
Active: active (running) since Wed 2021-03-24 07:06:29 EET; 15h ago
Docs: man:systemd-sysv-generator(8)
CGroup: /system.slice/apache2.service
|- 3173 /usr/sbin/apache2 -k start
|- 3177 /usr/sbin/apache2 -k start
|- 3178 /usr/sbin/apache2 -k start
|- 3180 /usr/sbin/apache2 -k start
|- 3336 /usr/sbin/apache2 -k start
|- 6578 /usr/sbin/apache2 -k start
|- 6681 /usr/sbin/apache2 -k start
|- 6682 /usr/sbin/apache2 -k start
|- 8578 /usr/sbin/apache2 -k start
|- 9339 /usr/sbin/apache2 -k start
|-11314 /usr/sbin/apache2 -k start
|-19089 /opt/unetlab/wrappers/qemu_wrapper -T 0 -D 8 -t Win10 -F /opt/qemu-4.1.0/bin/qemu-system-x86_64 -d 0 -x -- -device e1000,netdev=n
|-19090 /opt/unetlab/wrappers/qemu_wrapper -T 0 -D 8 -t Win10 -F /opt/qemu-4.1.0/bin/qemu-system-x86_64 -d 0 -x -- -device e1000,netdev=n
|-19091 sh -c TAG=T0D8- /opt/qemu-4.1.0/bin/qemu-system-x86_64 -device e1000,netdev=net0,mac=50:00:00:08:00:00 -netdev tap,id=net0,ifname
|-19092 /opt/qemu-4.1.0/bin/qemu-system-x86_64 -device e1000,netdev=net0,mac=50:00:00:08:00:00 -netdev tap,id=net0,ifname=vunl0_8_0,scrip
|-19394 /opt/unetlab/wrappers/qemu_wrapper -T 0 -D 5 -t ISE -F /opt/qemu-2.12.0/bin/qemu-system-x86_64 -d 0 -x -- -device e1000,netdev=ne
|-19395 /opt/unetlab/wrappers/qemu_wrapper -T 0 -D 5 -t ISE -F /opt/qemu-2.12.0/bin/qemu-system-x86_64 -d 0 -x -- -device e1000,netdev=ne
|-19396 sh -c TAG=T0D5- /opt/qemu-2.12.0/bin/qemu-system-x86_64 -device e1000,netdev=net0,mac=50:00:00:05:00:00 -netdev tap,id=net0,ifnam
`-19397 /opt/qemu-2.12.0/bin/qemu-system-x86_64 -device e1000,netdev=net0,mac=50:00:00:05:00:00 -netdev tap,id=net0,ifname=vunl0_5_0,scri

Mar 24 07:46:07 eve-ng sudo[18798]: www-data : TTY=unknown ; PWD=/opt/unetlab/html ; USER=root ; COMMAND=/opt/unetlab/wrappers/unl_wrapper -a wipe -
Mar 24 07:46:07 eve-ng sudo[18798]: pam_unix(sudo:session): session opened for user root by (uid=0)
Mar 24 07:46:07 eve-ng sudo[18798]: pam_unix(sudo:session): session closed for user root
Mar 24 07:46:10 eve-ng sudo[18908]: www-data : TTY=unknown ; PWD=/opt/unetlab/html ; USER=root ; COMMAND=/opt/unetlab/wrappers/unl_wrapper -a start
Mar 24 07:46:10 eve-ng sudo[18908]: pam_unix(sudo:session): session opened for user root by (uid=0)
Mar 24 07:46:11 eve-ng sudo[18908]: pam_unix(sudo:session): session closed for user root
Mar 24 07:46:15 eve-ng sudo[19214]: www-data : TTY=unknown ; PWD=/opt/unetlab/html ; USER=root ; COMMAND=/opt/unetlab/wrappers/unl_wrapper -a start
Mar 24 07:46:15 eve-ng sudo[19214]: pam_unix(sudo:session): session opened for user root by (uid=0)
Mar 24 07:46:15 eve-ng sudo[19214]: pam_unix(sudo:session): session closed for user root
Mar 24 21:44:05 eve-ng systemd[1]: Started LSB: Apache2 web server.



If anyone knows how to fix it I would really appreciate it.
Thanks,

Mat

Uldis (UD)
Posts: 5148
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: Can't log into HTML mode after upgrade to 2.0.3-70

Post by Uldis (UD) » Fri Apr 30, 2021 3:14 pm

Please do

Code: Select all

apt update

apt upgrade

Locked