Hi everyone,
I am new to EVE-NG and I am working on a network topology. For the topology, I need to add an ASR 1001-X Router to EVE-NG. I did not find any guide about the image installation. The firmware that I have has been downloaded from here (asr1001x-universalk9.16.09.05.SPA.bin and asr1001x-universalk9_noli.16.09.05.SPA.bin).
Now I do not know how to add the images to the EVE-NG. I have tried Cisco Dynamips Images and Cisco IOL methods. But obviously they don't work since the firmware I have, has not been converted to an image for a virtual platform. I am wondering if there is any way to make the .bin file work in EVE-NG by making a correct image file.
Thank you in advance for your help.
ASR 1001-X Image
Moderator: mike
-
- Posts: 5083
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: ASR 1001-X Image
ASR virtual image is CSR1000v
please use this how to:
https://www.eve-ng.net/index.php/docume ... rest-fuji/
any version of XR image can run on eve, instead ASR as you said
bin images are not supported and will not be, because they are for hw device only..
please use this how to:
https://www.eve-ng.net/index.php/docume ... rest-fuji/
any version of XR image can run on eve, instead ASR as you said
bin images are not supported and will not be, because they are for hw device only..