I am currently using the Xrv9K 7.2 image and am considering upgrading to 7.6 to test the new features of SR-MPLS FlexAlgo.
The 7.6 image appears to boot correctly and the interface still looks the same as 7.2, but I am unable to communicate packets. I'm wondering if the interface names are off, so I've tried connecting to the 7.6 hosts using back2back, but none of the interfaces are communicating. Do I need to modify some template? Any advice is welcome,Please. Does anyone tried this?
Thanks, in advance.
Xrv9000 7.6
Moderator: mike
-
- Posts: 1
- Joined: Wed Mar 28, 2018 8:01 pm
Re: Xrv9000 7.6
Hello, I have same issue and can't any idea how I can solve.
I test all newest soft and have following results.
When you more deep in dump I check that Xrv9000 don't send ARPreply packets to request
newest Xrv9000 that work is 7.4.1
7.7.1 - not work
7.5.2 - not work
7.4.2 - not work
7.4.1 - work
7.0.2 - work
I test all newest soft and have following results.
When you more deep in dump I check that Xrv9000 don't send ARPreply packets to request
newest Xrv9000 that work is 7.4.1
7.7.1 - not work
7.5.2 - not work
7.4.2 - not work
7.4.1 - work
7.0.2 - work
-
- Posts: 5084
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: Xrv9000 7.6
Works mate,
just change NIC type to e1000, no idea why cisco changed back driver to e1000 in the newer versions 7.x
just change NIC type to e1000, no idea why cisco changed back driver to e1000 in the newer versions 7.x
You do not have the required permissions to view the files attached to this post.