DMVPN Lab 1 Configuration
Moderator: mike
-
- Posts: 16
- Joined: Fri Dec 06, 2019 5:35 pm
DMVPN Lab 1 Configuration
Visit my blog for more labs: https://www.labsproject.net/
Image needed: Cisco IOSv
Description:
Four branch routers need to be connected to the corporate datacenter, configure entire infrastructure for this topology including basic configurations for the ISP router then IPv4 connections between HQ office and Branches are established, setup DMVPN communication. Directions to this lab are included within, check "Labs Task(s) for more details after you open .unl file.
Topology:
Image needed: Cisco IOSv
Description:
Four branch routers need to be connected to the corporate datacenter, configure entire infrastructure for this topology including basic configurations for the ISP router then IPv4 connections between HQ office and Branches are established, setup DMVPN communication. Directions to this lab are included within, check "Labs Task(s) for more details after you open .unl file.
Topology:
You do not have the required permissions to view the files attached to this post.
-
- Posts: 3
- Joined: Tue Dec 17, 2019 11:56 am
Re: DMVPN Lab 1 Configuration
I love your Cisco TSHOOT ticket labs and thought I'd try the DMVPN one. After downloading and installing both DMVPN 1 and 2, neither of those has the tasks for the lab in the Task section as stated in your post. Can you confirm and update please? Thanks in advance.
-
- Posts: 16
- Joined: Fri Dec 06, 2019 5:35 pm
Re: DMVPN Lab 1 Configuration
See my attached screenshot of Eve-NG! The tasks are there! Unless you are using Community version and that one does not allow users to have this feature! and I did not count on that! Let me know! Share with me your EVE screenshot when you open the lab.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 16
- Joined: Fri Dec 06, 2019 5:35 pm
Re: DMVPN Lab 1 Configuration
All 5 DMVPN Labs have been updated with tasks on my blog:
https://www.labsproject.net/2019/12/dmv ... ation.html
Thanks for letting me know about this issue.
https://www.labsproject.net/2019/12/dmv ... ation.html
Thanks for letting me know about this issue.
-
- Posts: 3
- Joined: Tue Dec 17, 2019 11:56 am
Re: DMVPN Lab 1 Configuration
That is exactly the problem as I'm using the EVE Community Edition. The 'Tasks' option inside the lab just isn't available.
Thank you for updating this information on your blog as it's extremely helpful.
What I like to do is copy/paste this information into the lab information by editing the lab and adding it to the Tasks field so I have a local copy of the tasks if needed.
Thank you for updating this information on your blog as it's extremely helpful.
What I like to do is copy/paste this information into the lab information by editing the lab and adding it to the Tasks field so I have a local copy of the tasks if needed.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 4
- Joined: Wed Jan 10, 2018 11:26 am
Re: DMVPN Lab 1 Configuration
which image you use for Cisco IOSv?
-
- Posts: 16
- Joined: Fri Dec 06, 2019 5:35 pm
Re: DMVPN Lab 1 Configuration
I will not able to tell you due to the fact that I do not remember since EVE-NG has its own naming convention, the original filename for the cisco image has been changed. I was going to see the path where images for this lab located but this is the only thing that came out: ls /opt/unetlab/addons/qemu/vios-15.6/virtioa.qcow2
-
- Posts: 4
- Joined: Wed Jan 10, 2018 11:26 am
Re: DMVPN Lab 1 Configuration
Thank you, i will try again.