GLOBAL PROTECT PALO

Any copyright material exchange is strictly forbidden. Any member violate this rule will be banned without warning.

Moderator: mike

Post Reply
JORDAN
Posts: 1
Joined: Sun Nov 07, 2021 6:41 am

GLOBAL PROTECT PALO

Post by JORDAN » Wed Nov 10, 2021 8:59 pm

Hello evry one.
I'm new.
I need support to configure GLOBAL Protect on PALO ALTO firewall using EVE NG.
In a real situation, we used a public Ip to configure it.
But i don't have a public IP for the LAB.
I do a nat to allow my lab computer to accces internt.
Every one can help me.

elsalanchester
Posts: 1
Joined: Thu May 25, 2023 6:33 am

Re: GLOBAL PROTECT PALO

Post by elsalanchester » Thu May 25, 2023 6:41 am

If you have an internal network setup, why not just put in another Linksys router, where the router's WAN port is plugged into a current internal LAN port on your network, and create a separate private range different from your current range. The Linksys router automatically is configured to NAT. Then you can setup port translations, etc, to its "internal" network. Then you can use a workstation out in your production network to connect to a service in the new private network, such as a VPN, but using the Linksys's "WAN" IP.

Post Reply