How to deploy multiple vFPC with vMX 17.3R3.10

[stanley2k]

Hello Experts,

I am trying to build a LAB that VCP will inter-connected with two vFPCs, I just referred to below link:
https://jncie.eu/how-to-deploy-vmx-with ... ve-ng-kvm/

I can see two vFPC in command of "show chassis fpc" result, and I can also see ge-1/x/x, ge-2/x/x in command output "show interface terse".

and I trying to configure IP address on both side of a link, however it's failed to ping remote IP, and no ARP data, and no ospf neighbor.

I am not sure what the problem is, need your experience here, or a correct way to build two or more FPCs to one VCP.

thanks for your suggestion, any information is appreciated!

Stanley

[Uldis (UD)]

My good friend Christian did it
https://jncie.eu/how-to-deploy-vmx-with ... ve-ng-kvm/

[stanley2k]

Yes, I was refer to this post from your friend too, but it's not working as expected.

The result is ping failed, and IGP does not work, I cannot see any OSPF neighbor on the interface.

so I am wondering there is something goes wrong, but not sure why... if any further information, please give me some hint.

thanks for your help.

Stanley

[ecze]

follow next webcast https://learningportal.juniper.net/juni ... x?id=11421

Christian will be able to answer and to show you how to do it...

E.

[stanley2k]

Hello, just registered, thanks for your information!

Stanley

[kiteboy]

can you post the output of show chassis fpc