Hi,
I have a bare metal install of Eve community on a server with spec:
288GB RAM and 2 x Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz
I followed the instructions as per https://www.eve-ng.net/index.php/docume ... 0v-switch/ to add a 9k image nxosv9k-7.0.3.I7.7.
When I add the node for the first time and boot it up it works fine (I have set the boot command to boot nxos bootflash:nxos.7.0.3.I7.7.bin). However now I'm getting an issue where it seems to crash on boot up when reloading (it doesn't even get to a boot loader).
I have attached a screenshot where the last error mentions "Find PE Image /......" etc.
Any ideas? If I add a new node and follow the process to set the boot command it works but it seems to be an issue when the node is rebooted.
Thanks in advance!
nxosv9k-7.0.3.I7.7 not booting upon 2nd boot
Moderator: mike
-
- Posts: 3
- Joined: Sat Feb 22, 2020 10:08 pm
nxosv9k-7.0.3.I7.7 not booting upon 2nd boot
You do not have the required permissions to view the files attached to this post.
-
- Posts: 5084
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: nxosv9k-7.0.3.I7.7 not booting upon 2nd boot
After you set the boot nxos command
need copy runn start
command as well..
Probably Image is jusr corrupted
need copy runn start
command as well..
Probably Image is jusr corrupted
-
- Posts: 3
- Joined: Sat Feb 22, 2020 10:08 pm
Re: nxosv9k-7.0.3.I7.7 not booting upon 2nd boot
Thank you. I had done copy run start so maybe it's a corrupt image. When setting up a new node it boots up fine so the template image must be fine. Maybe I'll find something in some Eve-NG log files.
-
- Posts: 3
- Joined: Sat Feb 22, 2020 10:08 pm
Re: nxosv9k-7.0.3.I7.7 not booting upon 2nd boot
After some playing around the issue was that I was using actual physical switch software instead of the virtual equivalent (Nexus 9000v)
nxosv-final.7.0.3.I7.7.qcow2 works fine.
Thanks.
nxosv-final.7.0.3.I7.7.qcow2 works fine.
Thanks.