Failure with Riverbed Steelhead

Before posting something, READ the changelog, WATCH the videos, howto and provide following:
Your install is: Bare metal, ESXi, what CPU model, RAM, HD, what EVE version you have, output of the uname -a and any other info that might help us faster.

Moderator: mike

Post Reply
templenton
Posts: 1
Joined: Tue Mar 17, 2020 2:55 am

Failure with Riverbed Steelhead

Post by templenton » Fri Mar 27, 2020 6:12 am

Good night dear

Failure with Riverbed Steelhead


I am new to the forum, and would like to know if anyone has experience with this bug. Install a Riverbed image to be more specific "image_rbt_sh_9_7_0_n6_ng_x86_64" that you download from the official page and recommended in the EVE-NG guide.

THE FLAW: it is that if I install this image in EVE it asks me for the following once the software starts
localhost login:
localhost login: admin
Login incorrect
init: serial-ttyS0 (/dev/ttyS0) main process ended, respawning
localhost login:


Importing the image directly through VMware works and asks me for the default credentials indicated in the installation guide.
installation guide.
Riverbed SteelHead
amnesiac login: admin
Last login: Sun Mar 22 04:21:17 on tty1
amnesiac_

conclusion I must be doing something wrong with EVE since the image is functional.
I copy the link of the how to that I have used for the installation


https://www.eve-ng.net/index.php/docume ... irtual-cx/

:geek: I will be very grateful for any support :geek:

Post Reply