Hi Guys,
I'm trying to get ASAv 9.4.1/9.3.2 working. I've applied procedure described in "how-to" section to change VNC to telnet, but still nothing is showing on the console.
Anyone had similar problem?
Thanks
ASAv - cannot access console via telnet
Moderator: mike
-
- Posts: 5084
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: ASAv - cannot access console via telnet
Get ASAv 9.6.X-9.8.x and follow how to it works perfectly
http://www.eve-ng.net/index.php/documen ... cisco-asav
btw just tested 9.4.200 and it works nice as well.
UD
http://www.eve-ng.net/index.php/documen ... cisco-asav
btw just tested 9.4.200 and it works nice as well.
UD
-
- Posts: 19
- Joined: Wed Apr 12, 2017 8:40 am
Re: ASAv - cannot access console via telnet
Thanks UD. I've followed the procedure you have mentioned. No luck. Images grabbed from my VIRL account and both behave the same way. Any idea how can I troubleshoot it?
EVE-NG reports node as running (in the status tab running nodes are > 0), but when I try to access it via telnet I have blank screen.
EVE-NG reports node as running (in the status tab running nodes are > 0), but when I try to access it via telnet I have blank screen.
-
- Posts: 19
- Joined: Wed Apr 12, 2017 8:40 am
Re: ASAv - cannot access console via telnet
Just tried 9.8.1, the same issue.
-
- Posts: 19
- Joined: Wed Apr 12, 2017 8:40 am
Re: ASAv - cannot access console via telnet
Small update. I changed image filename to virtioa.qcow2 and it seems to be working. I'll test it a bit more.
-
- Posts: 5084
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: ASAv - cannot access console via telnet
topic is closed because you do not read HowTo for ASAv....where is strictly said which qcow2 format must be ASAv image..
in first lines of how to is said that you must use virtioa.qcow2..
in first lines of how to is said that you must use virtioa.qcow2..