Interface issues - Cisco XE SD-WAN Router
Moderator: mike
-
- Posts: 9
- Joined: Thu Nov 05, 2020 10:24 pm
Interface issues - Cisco XE SD-WAN Router
Hi All.
Has anyone run into this? The interfaces listed in my topology are NOT being configured/recognized when I enter the configuration.
Thanks
Has anyone run into this? The interfaces listed in my topology are NOT being configured/recognized when I enter the configuration.
Thanks
You do not have the required permissions to view the files attached to this post.
-
- Posts: 5083
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: Interface issues - Cisco XE SD-WAN Router
no issues
you first check what you see on your router ...
if interfaces persist at al
and then answer is simple, screwed image
you first check what you see on your router ...
if interfaces persist at al
and then answer is simple, screwed image
-
- Posts: 9
- Joined: Thu Nov 05, 2020 10:24 pm
Re: Interface issues - Cisco XE SD-WAN Router
I downloaded 'csr1000v-ucmk9.16.12.4a-serial.qcow2' again and performed an MD5 verification.
still no interfaces
still no interfaces
You do not have the required permissions to view the files attached to this post.
-
- Posts: 5083
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: Interface issues - Cisco XE SD-WAN Router
Before you start configure anything, check
show ip intrface brief to be sure you see proper names.
sdwan routers are name sensitive but has no issues at all.
You must use proper template for scwan router created from qemu image
https://www.eve-ng.net/index.php/docume ... 00-sd-wan/
show ip intrface brief to be sure you see proper names.
sdwan routers are name sensitive but has no issues at all.
You must use proper template for scwan router created from qemu image
https://www.eve-ng.net/index.php/docume ... 00-sd-wan/
-
- Posts: 9
- Joined: Thu Nov 05, 2020 10:24 pm
Re: Interface issues - Cisco XE SD-WAN Router
just like all my other vendor images I have on eve-pro, I follow the template configuration.
I always review my configuration and steps BEFORE I make a post on here.
ive been using eve since you released it and I have NEVER had a problem until now with this SD-WAN CSR image.
------
mkdir /opt/unetlab/addons/qemu/csr1000vng-ucmk9.16.12.4a-sdwan
cd /opt/unetlab/addons/qemu/csr1000vng-ucmk9.16.12.4a-sdwan
mv csr1000v-ucmk9.16.12.4a-serial.qcow2 virtioa.qcow2
/opt/unetlab/wrappers/unl_wrapper -a fixpermissions
------
Router#show ip int br
Interface IP-Address OK? Method Status Protocol
Loopback65528 192.168.1.1 YES other up up
Router#
------
Router#show ver | i Ver
Cisco IOS XE Software, Version 16.12.04a
Cisco IOS Software [Gibraltar], Virtual XE Software (X86_64_LINUX_IOSD-UCMK9-M), Version 16.12.4a, RELEASE SOFTWARE (fc1)
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
GPL code under the terms of GPL Version 2.0. For more details, see the
Router#
I always review my configuration and steps BEFORE I make a post on here.
ive been using eve since you released it and I have NEVER had a problem until now with this SD-WAN CSR image.
------
mkdir /opt/unetlab/addons/qemu/csr1000vng-ucmk9.16.12.4a-sdwan
cd /opt/unetlab/addons/qemu/csr1000vng-ucmk9.16.12.4a-sdwan
mv csr1000v-ucmk9.16.12.4a-serial.qcow2 virtioa.qcow2
/opt/unetlab/wrappers/unl_wrapper -a fixpermissions
------
Router#show ip int br
Interface IP-Address OK? Method Status Protocol
Loopback65528 192.168.1.1 YES other up up
Router#
------
Router#show ver | i Ver
Cisco IOS XE Software, Version 16.12.04a
Cisco IOS Software [Gibraltar], Virtual XE Software (X86_64_LINUX_IOSD-UCMK9-M), Version 16.12.4a, RELEASE SOFTWARE (fc1)
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
GPL code under the terms of GPL Version 2.0. For more details, see the
Router#
-
- Posts: 5083
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: Interface issues - Cisco XE SD-WAN Router
first, we do guarantee that oroginal image will work.
2 ways.
from original qcow
https://www.eve-ng.net/index.php/docume ... 00-sd-wan/
and the best os from ISO:
like 17.3.2
https://www.eve-ng.net/index.php/docume ... rest-fuji/
both works very well, Especially on the eve pro
2 ways.
from original qcow
https://www.eve-ng.net/index.php/docume ... 00-sd-wan/
and the best os from ISO:
like 17.3.2
https://www.eve-ng.net/index.php/docume ... rest-fuji/
both works very well, Especially on the eve pro
You do not have the required permissions to view the files attached to this post.
-
- Posts: 5083
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: Interface issues - Cisco XE SD-WAN Router
If you still cannot sort this stuuf
visin our lve helpdesk and ping to me
my chat name is: EVE-NG-UD
https://www.eve-ng.net/index.php/live-helpdesk/
Use your gmail to join or create new account with your email...
It is so simple mate if to use recommended images
visin our lve helpdesk and ping to me
my chat name is: EVE-NG-UD
https://www.eve-ng.net/index.php/live-helpdesk/
Use your gmail to join or create new account with your email...
It is so simple mate if to use recommended images
-
- Posts: 5083
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: Interface issues - Cisco XE SD-WAN Router
And last:
I recommend to use SDWAn 20.3.1 or 20.3.1
and CSR 17.03.02 created from iso
I recommend to use SDWAn 20.3.1 or 20.3.1
and CSR 17.03.02 created from iso
-
- Posts: 9
- Joined: Thu Nov 05, 2020 10:24 pm
Re: Interface issues - Cisco XE SD-WAN Router
Im going for my second CCIE in Enterprise and Cisco is testing on version 16.12.
This is why I have not tried any other versions.
thanks
This is why I have not tried any other versions.
thanks
-
- Posts: 5083
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: Interface issues - Cisco XE SD-WAN Router
16.12 works well either