How to deploy multiple vFPC with vMX 17.3R3.10

Moderator: mike

Post Reply
stanley2k
Posts: 3
Joined: Tue Aug 22, 2017 10:31 am

How to deploy multiple vFPC with vMX 17.3R3.10

Post by stanley2k » Sat Feb 08, 2020 9:32 am

Hello Experts,

I am trying to build a LAB that VCP will inter-connected with two vFPCs, I just referred to below link:
https://jncie.eu/how-to-deploy-vmx-with ... ve-ng-kvm/

I can see two vFPC in command of "show chassis fpc" result, and I can also see ge-1/x/x, ge-2/x/x in command output "show interface terse".

and I trying to configure IP address on both side of a link, however it's failed to ping remote IP, and no ARP data, and no ospf neighbor.

I am not sure what the problem is, need your experience here, or a correct way to build two or more FPCs to one VCP.

thanks for your suggestion, any information is appreciated!

Stanley

Uldis (UD)
Posts: 2814
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: How to deploy multiple vFPC with vMX 17.3R3.10

Post by Uldis (UD) » Sat Feb 08, 2020 10:10 am


stanley2k
Posts: 3
Joined: Tue Aug 22, 2017 10:31 am

Re: How to deploy multiple vFPC with vMX 17.3R3.10

Post by stanley2k » Sat Feb 08, 2020 3:17 pm

Yes, I was refer to this post from your friend too, but it's not working as expected.

The result is ping failed, and IGP does not work, I cannot see any OSPF neighbor on the interface.

so I am wondering there is something goes wrong, but not sure why... if any further information, please give me some hint.

thanks for your help.

Stanley

ecze
Posts: 515
Joined: Wed Mar 15, 2017 1:54 pm

Re: How to deploy multiple vFPC with vMX 17.3R3.10

Post by ecze » Sat Feb 08, 2020 5:31 pm

follow next webcast https://learningportal.juniper.net/juni ... x?id=11421

Christian will be able to answer and to show you how to do it...

E.

stanley2k
Posts: 3
Joined: Tue Aug 22, 2017 10:31 am

Re: How to deploy multiple vFPC with vMX 17.3R3.10

Post by stanley2k » Sun Feb 09, 2020 3:19 am

Hello, just registered, thanks for your information!

Stanley

kiteboy
Posts: 5
Joined: Wed Feb 12, 2020 7:43 am

Re: How to deploy multiple vFPC with vMX 17.3R3.10

Post by kiteboy » Wed Feb 12, 2020 7:55 am

can you post the output of show chassis fpc

Post Reply