Dell OS10 virtualization images

[jvanhowell]

I am new to EVE-NG. We use Dell switches, the S4000 series for our network core.
My goal is to simulate our College infrastructure, We have 4 campuses.
I have a Dell virtualization ZIP file that I downloaded before the Force10 site went away, OS10.5.2.2.

I have a couple problems:
1. My VM is installed on an ESXi 6.0.0 server, virtualization is on in the server bios and virtualization is on for the VM. I still get the message that Virtualization is off. I believe this is the reason I am unable to run Fixpermissions. I am getting the error on line 71 message.

2. When I start the DellOS10 node, after setting it up. It starts, I get the message that says it starts. Then it immediately stops.

Any idea why?

[jvanhowell]

I managed to get EVE-NG installed on VirtualBox running on my local drive.
I did not get the error I was getting about Processor Virtualization, I am able to run the fixpermissions routine.
After uploading the Dell OS10.5.2.2.vmdk's that I have, and fixing permissions they are all working.

[Uldis (UD)]

VirtualBox is not supported for EVE !!!

https://www.eve-ng.net/index.php/docume ... quirement/

[jvanhowell]

I have a Dell OS10.5.2.2 zip file. It has multiple images.
I am using the s4000 image. I had no problems after I realized it does not load nearly as fast as on the switch hardware. I just had to wait for it to do its thing and stop hitting enter to see if it is working.

Once I booted into OS10 the first command I run (not in config mode) ZTD Cancel. This cancels Zero Touch Deployment. That sometimes interfered with the OS operation. It would lock the config.

Hope this helps.

I have the same problem with Ethernet Ports on this image. The S4000 switch registers as an S4048, 48-10Gig ports and 6-40Gig ports.

Status : up
Down Reason : unknown
Digital Optical Monitoring : disable
System Location LED : off
Required Type : S4048
Current Type : S4048
Hardware Revision :
Software Version : 10.5.2.2
Physical Ports : 48x10GbE, 6x40GbE

I can only get 25 ports plus management port to show up in the Node.

[Uldis (UD)]

and 25 ports is more than enough

[jvanhowell]

What you are saying is that 25 ports is all that is allowed in EVE-NG?
I will need to rewrite my configurations to stay within the 25 port limit?

[Uldis (UD)]

It is not EVE limit but Virtual VM of Dell or other vendors, like cisco vIOS L2 for example supports up to 16 ports, but Arista VEOS up to 25 ports

[networkjess]

Where is the appliance file located?..

1) Download the GNS3 Appliance zip archive here: https://www.force10networks.com/CSPorta ... ation.aspx

[wanatkinson]

Has anyone got a Dell OS10 image working recently? I've tried following the advice in some of the threads but no dice. I can get to the ONIE screen but OS10 doesn't load. Not sure how to get past that.

Can this be added to the supported images list?