ASR 1001-X Image
Posted: Tue May 31, 2022 10:55 pm
Hi everyone,
I am new to EVE-NG and I am working on a network topology. For the topology, I need to add an ASR 1001-X Router to EVE-NG. I did not find any guide about the image installation. The firmware that I have has been downloaded from here (asr1001x-universalk9.16.09.05.SPA.bin and asr1001x-universalk9_noli.16.09.05.SPA.bin).
Now I do not know how to add the images to the EVE-NG. I have tried Cisco Dynamips Images and Cisco IOL methods. But obviously they don't work since the firmware I have, has not been converted to an image for a virtual platform. I am wondering if there is any way to make the .bin file work in EVE-NG by making a correct image file.
Thank you in advance for your help.
I am new to EVE-NG and I am working on a network topology. For the topology, I need to add an ASR 1001-X Router to EVE-NG. I did not find any guide about the image installation. The firmware that I have has been downloaded from here (asr1001x-universalk9.16.09.05.SPA.bin and asr1001x-universalk9_noli.16.09.05.SPA.bin).
Now I do not know how to add the images to the EVE-NG. I have tried Cisco Dynamips Images and Cisco IOL methods. But obviously they don't work since the firmware I have, has not been converted to an image for a virtual platform. I am wondering if there is any way to make the .bin file work in EVE-NG by making a correct image file.
Thank you in advance for your help.