I am having a problem to run Cisco IOL images on Eve-ng.
I set everything based on https://www.eve-ng.net/index.php/docume ... -on-linux/ and when I test my IOL images with /opt/unetlab/addons/iol/bin/<iosname.bin> 1 command seems everything is fine.
But when I try to start a node in a lab it says: Failed to start node (12)
In /var/log/syslog I can see the following (there is no stp states):
Code: Select all
ovs-vsctl: ovs|00001|vsctl|INFO|Called as ovs-vsctl del-port vunl0_1_0
ovs-vsctl: ovs|00002|db_ctl_base|ERR|no port named vunl0_1_0
systemd-udevd[13449]: Could not generate persistent MAC address for vunl0_1_0: No such file or directory
ovs-vsctl: ovs|00001|vsctl|INFO|Called as ovs-vsctl del-port vunl0_1_16
ovs-vsctl: ovs|00002|db_ctl_base|ERR|no port named vunl0_1_16
systemd-udevd[13499]: Could not generate persistent MAC address for vunl0_1_16: No such file or directory
ovs-vsctl: ovs|00001|vsctl|INFO|Called as ovs-vsctl del-port vunl0_1_32
ovs-vsctl: ovs|00002|db_ctl_base|ERR|no port named vunl0_1_32
systemd-udevd[13449]: Could not generate persistent MAC address for vunl0_1_32: No such file or directory
ovs-vsctl: ovs|00001|vsctl|INFO|Called as ovs-vsctl del-port vunl0_1_48
ovs-vsctl: ovs|00002|db_ctl_base|ERR|no port named vunl0_1_48
systemd-udevd[13499]: Could not generate persistent MAC address for vunl0_1_48: No such file or directoryI have been using eve-ng on another machine for years with no problem. I configured that too without any problem but now on the new machine I have no clue what should I need to do to solve this/these problem(s).
The output of eve-info command (on the new machine):
Code: Select all
Mon Jan 20 12:55:00 CET 2020
---------------Packages Installed----------------
ii eve-ng 2.0.3-105
ii eve-ng-dynamips 2.0.2-2
ii eve-ng-guacamole 2.0.3-87
ii eve-ng-qemu 2.0.5-24
ii eve-ng-schema 2.0.6-14
ii eve-ng-vpcs 1.0-eve-ng
ii linux-headers-4.9.40-eve-ng-ukms+ 4.9.40-eve-ng-ukms-brctl
ii linux-image-4.20.17-eve-ng-ukms+ 4.20.17-eve-ng-ukms-brctl
---------------Hostname--------------------------
Static hostname: en-eve-ng
Virtualization: xen
Operating System: Ubuntu 16.04.6 LTS
Kernel: Linux 4.20.17-eve-ng-ukms+
Architecture: x86-64
---------------Disk Usage------------------------
Filesystem Size Used Avail Use% Mounted on
udev 1.9G 0 1.9G 0% /dev
tmpfs 393M 8.5M 385M 3% /run
/dev/mapper/en--eve--ng-root 19G 4.2G 14G 25% /
tmpfs 2.0G 0 2.0G 0% /dev/shm
tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs 2.0G 0 2.0G 0% /sys/fs/cgroup
---------------CPU Info--------------------------
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 2
On-line CPU(s) list: 0,1
Thread(s) per core: 1
Core(s) per socket: 2
Socket(s): 1
NUMA node(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 42
Model name: Intel(R) Xeon(R) CPU E31260L @ 2.40GHz
Stepping: 7
CPU MHz: 2394.632
BogoMIPS: 4789.16
Hypervisor vendor: Xen
Virtualization type: full
L1d cache: 32K
L1i cache: 32K
L2 cache: 256K
L3 cache: 8192K
NUMA node0 CPU(s): 0,1
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush acpi mmx fxsr sse sse2 ss ht syscall nx rdtscp lm constant_tsc rep_good nopl cpuid pni pclmulqdq ssse3 cx16 pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx hypervisor lahf_lm cpuid_fault pti ssbd ibrs ibpb stibp xsaveopt flush_l1d
---------------Memory Info-----------------------
total used free shared buff/cache available
Mem: 3.8G 315M 3.0G 18M 576M 3.3G
Swap: 1.9G 0B 1.9G
---------------Nic Info--------------------------
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master pnet0 state UP mode DEFAULT group default qlen 1000
---------------IP Info---------------------------
● State: n/a
---------------Bridge Info-----------------------
pnet0 8000.00163e42e132 no eth0
pnet1 8000.000000000000 no
pnet2 8000.000000000000 no
pnet3 8000.000000000000 no
pnet4 8000.000000000000 no
pnet5 8000.000000000000 no
pnet6 8000.000000000000 no
pnet7 8000.000000000000 no
pnet8 8000.000000000000 no
pnet9 8000.000000000000 no
---------------H/W Accel-------------------------
INFO: Your CPU does not support KVM extensions
KVM acceleration can NOT be used
---------------Service Info----------------------
-------------------------------------------------
--------------Guacamole--------------------------
● guacd.service - LSB: Guacamole proxy daemon
Loaded: loaded (/etc/init.d/guacd; bad; vendor preset: enabled)
Active: active (running) since Sun 2020-01-19 09:54:04 CET; 1 day 3h ago
--------------Tomcat-----------------------------
● tomcat8.service - LSB: Start Tomcat.
Loaded: loaded (/etc/init.d/tomcat8; bad; vendor preset: enabled)
Active: active (running) since Sun 2020-01-19 09:54:09 CET; 1 day 3h ago
--------------Mysql------------------------------
● mysql.service - MySQL Community Server
Loaded: loaded (/lib/systemd/system/mysql.service; enabled; vendor preset: enabled)
Active: active (running) since Sun 2020-01-19 09:54:05 CET; 1 day 3h ago
--------------Apache-----------------------------
● apache2.service - LSB: Apache2 web server
Loaded: loaded (/etc/init.d/apache2; bad; vendor preset: enabled)
Drop-In: /lib/systemd/system/apache2.service.d
└─apache2-systemd.conf
Active: active (running) since Sun 2020-01-19 09:54:08 CET; 1 day 3h agoI hope you guys can help me. Thanks for your helps and efforts in advance,