Moderator: mike
-
delmiro
- Posts: 8
- Joined: Thu Dec 16, 2021 1:57 pm
Post
by delmiro » Sun Jun 18, 2023 1:56 am
I have successfully installed 8000v (so I thought
) and even had it configured for SDWAN and working fine. I powered it off and turned it back on, and now it won't boot. I followed the installation recommendations in the how to
https://www.eve-ng.net/index.php/docume ... yst-8000v/. It gets stuck on boot with the following message.
[vmxnet3][WR][vmxnet3_get_command_status]: Received request for unknown command: cafe000f
Any idea on how I can resolve this issue? I would really like to get the 8000v working on EVE-NG. I appreciate any help you can provide.
Thank you
image1.png
image2.png
You do not have the required permissions to view the files attached to this post.
-
Uldis (UD)
- Posts: 5177
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
-
Contact:
Post
by Uldis (UD) » Sun Jun 18, 2023 7:01 am
set qemu version 5.2.0
and cafe output is totally noram behave on NIC vmxnet3, harmless
-
delmiro
- Posts: 8
- Joined: Thu Dec 16, 2021 1:57 pm
Post
by delmiro » Sun Jun 18, 2023 9:01 pm
I tried setting the qemu version to 5.2.0 with the same results. The router would not boot up all the way, it gets stuck. I also tried using qemu version 6.0 and same issue. Do you have any other ideas or suggestions?
Thank you for your help on this.
-
Uldis (UD)
- Posts: 5177
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
-
Contact:
Post
by Uldis (UD) » Mon Jun 19, 2023 1:59 pm
next question is what is your CPU model assigned for EVE and how many cores??
-
delmiro
- Posts: 8
- Joined: Thu Dec 16, 2021 1:57 pm
Post
by delmiro » Mon Jun 19, 2023 8:55 pm
I'm using two Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz on ESXi host where the EVE is running on. Virtual machines shows 8 CPU 2 core per socket.
image3.png
You do not have the required permissions to view the files attached to this post.
-
Uldis (UD)
- Posts: 5177
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
-
Contact:
Post
by Uldis (UD) » Mon Jun 19, 2023 8:57 pm
First advice, set CPU to 24
and Cores per socket to 1
These are best recommended EVE VM settings
-
delmiro
- Posts: 8
- Joined: Thu Dec 16, 2021 1:57 pm
Post
by delmiro » Mon Jun 19, 2023 11:51 pm
Hi Uldis, I tried changed the CPU count from 8 to 24 but I received an error. it looks like I need to upgrade my VMware license. Do you think the CPU count is contributing to this issue?
The error is
Failed - There are insufficient licenses to complete this operation.
-
delmiro
- Posts: 8
- Joined: Thu Dec 16, 2021 1:57 pm
Post
by delmiro » Wed Jun 21, 2023 8:32 pm
Anyone that can assist with this issue?
-
Uldis (UD)
- Posts: 5177
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
-
Contact:
Post
by Uldis (UD) » Thu Jun 22, 2023 7:52 am
You must sort up your esxi license...
-
geebits
- Posts: 2
- Joined: Sat Apr 01, 2023 8:32 pm
Post
by geebits » Sun Jul 02, 2023 4:12 pm
Or run Eve on bare metal. I've seen way better experieces that way than my previous VMware and proxmox builds