I am running 2.0.3-68 on Mac Sierra running Fusion 8.5.8. I followed below:
http://www.eve-ng.net/index.php/documen ... x9k-switch
and tried to start Node but it doesn't start and after a while goes back to default non-start state. I tried both codes:
7.0(3)I5(2) <---recommend code
due to old forum below, I also tried 7.0(3)I6(1) and same problem
http://www.eve-ng.net/forum/viewtopic.p ... sv9k#p1597
Thanks
nxosv9k
Moderator: mike
-
- Posts: 409
- Joined: Sun Mar 19, 2017 10:27 pm
Re: nxosv9k
It was working ok, to confirm i have booted again it works ok.antman wrote: ↑Wed Oct 04, 2017 10:13 pmI am running 2.0.3-68 on Mac Sierra running Fusion 8.5.8. I followed below:
http://www.eve-ng.net/index.php/documen ... x9k-switch
and tried to start Node but it doesn't start and after a while goes back to default non-start state. I tried both codes:
7.0(3)I5(2) <---recommend code
due to old forum below, I also tried 7.0(3)I6(1) and same problem
http://www.eve-ng.net/forum/viewtopic.p ... sv9k#p1597
Thanks
Code: Select all
switch# show version
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_serie
s_home.html
Copyright (c) 2002-2017, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software are covered under the GNU Public
License. A copy of the license is available at
http://www.gnu.org/licenses/gpl.html.
NX-OSv9K is a demo version of the Nexus Operating System
Software
BIOS: version
NXOS: version 7.0(3)I6(1)
BIOS compile time:
NXOS image file is: bootflash:///nxos.7.0.3.I6.1.bin
NXOS compile time: 5/16/2017 22:00:00 [05/17/2017 06:21:28]
Hardware
cisco NX-OSv Chassis
with 8160452 kB of memory.
Processor Board ID 92H0HSJ06IO
Device name: switch
bootflash: 3509454 kB
Kernel uptime is 0 day(s), 0 hour(s), 3 minute(s), 36 second(s)
Last reset
Reason: Unknown
System version:
Service:
plugin
Core Plugin, Ethernet Plugin
Active Package(s):
switch#
R!
-
- Posts: 5180
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: nxosv9k
On v80 it works great as well
-
- Posts: 6
- Joined: Tue Jul 04, 2017 7:31 pm
Re: nxosv9k
yup, upgrade to v81 and it works. Thx