Cisco CSRv1000 (SD-WAN)

Versions this guide is based on:

EVE Image Name Downloaded Filename Version vCPUs vRAM Console
csr1000vng-ucmk9.16.12.1b-sdwan csr1000v-ucmk9.16.12.1b-serial.qcow2 X86_64_LINUX_IOSD-UCMK9-M 1 4096 telnet
csr1000vng-ucmk9.16.11.1a-sdwan csr1000v-ucmk9.16.11.1a-serial.qcow2 X86_64_LINUX_IOSD-UCMK9-M 1 4096 telnet


Other versions should also be supported following bellow’s procedure.

Steps below are based on csr1000vng-ucmk9.16.12.1b-sdwan creation, for other image deployment, use proper names respectively.

1. SSH to EVE and login as root, from cli and create image directory in the EVE:

mkdir /opt/unetlab/addons/qemu/csr1000vng-ucmk9.16.12.1b-sdwan

2. Upload the downloaded csr1000v-ucmk9.16.12.1b-serial.qcow2 image to the EVE using for example FileZilla or WinSCP.

3. Go to image directory and rename original filename to virtioa.qcow2:

cd /opt/unetlab/addons/qemu/csr1000vng-ucmk9.16.12.1b-sdwan

4. Rename original filename to virtioa.qcow2

mv csr1000v-ucmk9.16.12.1b-serial.qcow2 virtioa.qcow2

5. Fix permissions:

/opt/unetlab/wrappers/unl_wrapper -a fixpermissions

CSR SD-WAN Image is created and ready to use, now you can open lab and your image will be visible under nodes csr1000vng